Catalogue

Genesys' complete range of M2M equipment, 6LoWPAN personal area networking devices and Genesys Modular Stack modules may be perused on this page. If you're interested in a Genesys product or system installation, contact us on +61 2 9496 8900 or send an email to enquiries@genesysdesign.com.au.

Use the following links to navigate through the various sections of this catalogue. Many of the products are clickable for further details, and all products are accompanied by downloadable PDF catalogues.

A pdf version of our catalog can be downloaded here


Modules
Genesys 6LoWPAN Transceiver Genesys Modular Stack

6LoWPAN Transceiver

GBI-ML-200

The Genesys 6LoWPAN Transceiver Module provides an IEEE 802.15.4 compatible foundation for your Personal Area Network (PAN). It features a powerful 32-bit ARM7-based microprocessor featuring 128KB of serial flash memory, 96KB of RAM and an integrated 1 mW IEEE 802.15.4 compatible transmitter.

The 6LoWPAN Transceiver Module contains up to 64 programmable GPIOs, bringing you an unprecedented level of wireless control.

Click Here to download the 6LoWPAN Transceiver Product Brochure

Genesys 6LoWPAN Transciever Pro Genesys Modular Stack

6LoWPAN transceiver Pro

GBI-ML-200P

The Genesys 6LoWPAN Transceiver Module provides an IEEE 802.15.4 compatible foundation for your Personal Area Network (PAN). It features a powerful 32-bit ARM7-based microprocessor featuring 128KB of serial flash memory, 96KB of RAM and a powerful integrated 100 mW IEEE 802.15.4 compatible transmitter, with RF shielding to keep interference to a minimum.

Click Here to download the 6LoWPAN Transceiver Pro Product Brochure

Genesys WiFi Module Genesys Modular Stack

WiFi Module

GBI-MC-200

The Genesys WiFi Module provides a powerhouse of wireless connectivity to any existing Genesys Modular Stack solution. It comes with an IEEE 802.11b/g/n transceiver as well as a full package of RFC-compliant network, transport and application layer protocols implemented in firmware. Any Genesys Modular Stack solution fitted with the WiFi module acquires fast, robust and easily integrated wireless connectivity.

Click Here to download the Genesys Wifi Module Brochure

Genesys 3G Voice Data Module Genesys Modular Stack

3G Voice & Data Module

GBI-MC-201

The Genesys 3G Voice and Data Module adds wide area network and voice communications, worldwide*, to Genesys Modular Stack compatible equipment, using supported SIM cards and when in range of a network.

Please ensure that your network supports UMTS bands from 850 to 2100MHz inclusive. The module also supports a 2G (GPRS) fallback mode. The 3G Voice and Data Module has been tested on Australian Telstra, Optus and Vodafone networks.

Click Here to download the 3G Voice & Data Module Product Brochure

Genesys 4G Voice Data Module Genesys Modular Stack

LTE 4G Voice & Data Module

GBI-MC-204

The Genesys LTE 4G Cellular Voice and Data Module adds wide area network and voice communications, worldwide*, to Genesys Modular Stack compatible equipment, using supported SIM cards and when in range of a network.

Please ensure that your network supports UMTS bands from 800 to 2600MHz inclusive. The module also supports 3G fallback bands. The LTE 4G Cellular Voice and Data Module has been tested on Australian Telstra, Optus and Vodafone networks.

Click Here to download the LTE 4G Voice & Data Module Product Brochure

Genesys 4G Voice Data Module Genesys Modular Stack

LTE Cat M1/NB1 Cellular Data Module

GBI-MC-205

The Genesys LTE Cat M1/NB1 Cellular Data Module adds low powered wide area network communication to Genesys Modular Stack compatible equipment.

Please ensure that your network supports LTE Cat M1/NB1 bands from 700 to 2100MHz inclusive. The LTE Cat M1/NB1 Cellular Data Module has been tested on Australian Telstra network. Check your network provider’s rollout for more information.

Click Here to download the LTE Cat M1/NB1 Cellular Data Module Product Brochure

Genesys Isolated RS485 Module Genesys Modular Stack

Isolated RS485 Module

GBI-MC-202

The Genesys Isolated RS-485 module is a highly robust communications interfacing solution designed for survivability. The RS-485 connections include large- sized transient absorbers and spark-gaps in a multi-staged protection network within the isolated region of the circuit board. The module also includes a number of other communications interfaces (e.g. CAN) making the module a versatile communications solution.

Click Here to download the Genesys Isolated RS485 Module Brochure

Genesys Bluetooth LE Module Genesys Modular Stack

Bluetooth LE Module

GBI-MC-203

The Genesys Bluetooth Low Energy Module is a modular integrated wireless communications solution for creating low power Personal Area Networks. The Bluetooth LE Module provides qualified Bluetooth communications in Genesys M2M equipment. This provides a low-cost, low-power bridge between Smartphones and Tablets and Genesys M2M equipment.

Click Here to download the Genesys Bluetooth LE Module Brochure

Genesys Spatial Sensor Module Genesys Modular Stack

Spatial Sensor Module

GBI-MS-200

The Genesys Sensor Module is an all-in-one unit for providing environmental and spatial sensing capabilities to Genesys Modular Stack compatible equipment. The Sensor Module contains a German engineered u.Blox multi-GNSS module in addition to an on-board backup battery, antenna and LNA. Compatible with GPS, GLONASS, Galileo, QZSS and SBAS, the Sensor Module provides industrial-grade sensitivity in a compact, energy efficient unit. The Sensor Module also houses a 9-axis accelerometer providing additional accuracy to its positioning functionality.

Click Here to download the Genesys Spatial Sensor Module Brochure

Genesys Isolated 4-20mA Loop Module Genesys Modular Stack

Isolated 4-20mA loop Module

GBI-MS-201

The Genesys Isolated 4-20mA Loop Module is a highly-integrated solution for enabling any GMS compatible system to monitor current loop instrumentation. Each unit comes with two 4-20mA current loop channels (which is configurable for 0-20mA, 0-10V, 1-10V, 0-50V and 1-50V inputs via fitting options), one voltage signalling channel and an isoSPI channel. The isoSPI interface is suitable for communicating with remote SPI devices (up to 100m cable lengths supported) and has the added benefit of electrical isolation.

Click Here to download the Genesys Isolated 4-20mA Loop Module Brochure

Genesys Solar Charger Module Genesys Modular Stack

Solar Charger Module

GBW-MH-200

The Genesys Solar Charger Module is an integrated solution for charging various battery chemistries using solar power. The Solar Charger Module can be used with inexpensive solar panels and enables IoT devices to function autonomously without mains power. The module is readily compatible with inexpensive lead acid batteries and can be expanded to charge other battery chemistries with accessory boards (such as the Lithium Battery Protection Board GBW-XN-200).

Click Here to download the Solar Charger Module Brochure

Multi-Chemistry Wide Input Charger Module Genesys Modular Stack

Multi-Chemistry Wide Input Charger Module

GBW-MH-201

The Genesys Multi-Chemistry Wide Input Charger Module is a compact flexible intelligent battery charger with power path control that can be configured to charge Li-ion or Lead-acid battery chemistries. The module has input and output protection integrated which prevents damage to equipment and batteries if a fault was to occur. Genesys Modular Stack technology is also integrated, enabling smart monitoring of batteries.

Click Here to download the Multi-Chemistry Wide Input Charger Module Brochure

Genesys Lithium Battery Protection Board Genesys Modular Stack

Lithium Battery Protection Board

GBW-XN-200

Expand your Genesys Solar Charger Module (GBW-MH-200) enabled system with lithium-chemistry batteries (such as Lithium Ion and Lithium Polymer) with the Genesys Lithium Battery Protection Board. The board is capable of monitoring and preventing damage to lithium battery packs and equipment from overtemperature, overcharging, undercharging, discharge overcurrent and short circuit events.

Click Here to download the Lithium Battery Protection Board Brochure



Baseboards
Genesys I/O Base Board PCB Genesys Modular Stack

I/O Baseboard

GBI-BG-200

The Genesys I/O Baseboard gives you a proven, low-cost platform to build your wired or wireless control network. The I/O Base Board is a Genesys Modular Stack host, has 2 A/D input and 2 D/A output channels along with 2 solid state relay outputs and 3 GPIO lines. This provides an excellent base for medium complexity control systems.

Click Here to download the I/O Baseboard Product Brochure

Genesys I/O Module Pro PCB Genesys Modular Stack

I/O Baseboard Pro

GBI-BG-200P

The Genesys I/O Base Board Pro gives you a powerful platform to build your advanced wired or wireless control network from. The I/O Base Board Pro is a Genesys Modular Stack host, has 4 A/D input and 2 D/A output channels along with 2 solid state relay outputs and 9 GPIO lines; providing an excellent base for high complexity control systems. It can also be augmented with the GUI accessory board (GBU-XN-200).

Click Here to download the I/O Base Board Pro Product Brochure

Genesys Embedded Processor Pro Genesys Modular Stack

Embedded Processor Pro

GBE-BY-200P

The Genesys Embedded Processor Pro is designed for applications where the processing power offered by GMS processor boards (such as the 6LoWPAN module Pro GBI-ML-200P) needs to be complemented or enhanced RTOS (Real Time Operating System) functionality is needed. The board boasts a 120MHz Cortex M3 microcontroller with 512kB internal flash memory and 96kB complimented with an external 4Mbit of SRAM.

Click Here to download the Genesys Embedded Processor Pro

Genesys Isolated 4-20mA Loop Base Board Genesys Modular Stack

Isolated 4-20mA Loop Base Board

GBI-BS-201

The Genesys Isolated 4-20mA Loop Base Board allows M2M/IoT-enabling of industrial current loop and voltage input instrumentation. Each unit is provided with two 4-20mA current loop channels along with RS-485, isolated GPIO interface and Genesys Modular Stack (GMS) expandability to form the ultimate industrial monitoring solution. Comprehensive protection circuitry prevents input damage from ESD, overvoltage and reverse polarity events ensuring reliability.

Click Here to download the Isolated Loop Base Board Product Brochure

Genesys Sensor Base Board Genesys Modular Stack

Sensor Base Board

GBI-BS-200

The Genesys Sensor Base Board is designed to be compact and low-cost. It is specifically intended to be retrofitted into “dumb” sensors and actuators to allow them to become part of the Internet of Things (IoT). Designed to be as robust as possible, the Sensor Base Board is designed for ultra-low power in battery powered system and includes robust I/O connections broken out.

Click Here to download the Genesys Sensor Base Board Brochure

Genesys Sensor Base Board Pro Genesys Modular Stack

Sensor Base Board Pro

GBI-BS-200P

The Genesys battery-powered Sensor Base Board Pro includes all of the capability of the Sensor Base Board in addition to an array of sensors including GNSS location fixing, temperature sensing, humidity sensing, RTC and 9-axis accelerometer.

Click Here to download the Genesys Sensor Base Board Pro Brochure

Genesys Sensor Base Board Ultra Genesys Modular Stack

Sensor Base Board Ultra

GBI-BS-200U

The Genesys battery-powered Sensor Base Board Ultra is the ultimate in battery powered I/O and user configurability. This base board is capable of fullfilling the requirements of any application that requires battery power, mobility, advanced user interface, generic I/O devices integration and spatial environmental monitoring.

Click Here to download the Genesys Sensor Base Board Ultra Brochure

Genesys GUI Accessory Board PCB

GUI Accessory Board

GBU-XN-200

The Genesys GUI Accessory Board adds control and monitoring functionality to an I/O Base Board Pro. Featuring a vibrant 128x64 monochrome LCD screen, the GUI Accessory Board lets you quickly glance at parameters of your choice without needing to go through the hassle of logging into your browser or smartphone. It’s also great for security - ensuring users without access to the M2M infrastructure can see the most important information.

Click Here to download the GUI Accessory Board Product Brochure



Equipment
Genesys M2M IoT Network Server

M2M IoT Network Server

GEH-AM-200

The Genesys M2M IoT Network server is the central hub of your M2M installation. The Network Server aggregates data from all of your devices (via 6LoWPAN, Ethernet, Wi-Fi or RS-485) and allows them to interoperate with either themselves; or other locally or remotely connected devices. It also transforms your devices into Internet of Things (IoT) capable devices - connecting to the internet via 3G, Wi-Fi or Ethernet. For an additional layer of security and speed, Genesys’ Cloud Server keeps rolling backups of your M2M settings.

The M2M Network Server makes connecting your devices to the Internet of Things fast, efficient and low-risk.

Click Here for more information on the M2M IoT Network Server

Click Here to download the M2M Network Server Product Brochure

Genesys M2M Floor Controller

M2M Network Floor Controller

GEH-AM-201

The Genesys M2M Network Floor Controller provides a low-cost, single-device solution for Internet-enabling a wireless network of devices, allowing those devices to interoperate with themselves or other locally or remotely connected devices. It allows you to remotely configure, control, monitor and log your M2M/IoT network via the Internet. Receive email & SMS alerts & reports, and optimise time on site.

Click Here to download the M2M Floor Controller Product Brochure

Genesys 6LoWPAN Gateway Border Router

6LoWPAN Gateway/Router

GEG-AM-200

The 6LoWPAN Gateway/Router provides a transparent RS-485 tunnel over a wireless IEEE 802.15.4 standard, with 6LoWPAN connectivity.

When installed, the Gateway allows for transparent communication between RS-485 busses over a wireless network, eliminating the need for long cabling.

For example, control networks such as MODBUS can be elegantly installed with Internet connectivity via Modbus TCP.

Click Here for more information on Genesys 6LoWPAN Gateway/Router devices

Click Here to download the Genesys 6LoWPAN Gateway (Standard) Product Brochure

Genesys 6LoWPAN Gateway Border Router Pro Version

6LoWPAN Gateway/Router Pro

GEG-AM-200P

The 6LoWPAN Gateway/Router Pro provides multiple transparent RS-485 tunnels over a wireless IEEE 802.15.4 standard, with 6LoWPAN connectivity.

The Pro version expands on the 6LoWPAN Gateway/Router by providing additional input and output channels, as well as the provisions to support a customisable user interface to suit your needs, including a 128x64 LCD, LEDs and a choice of 4 pushbuttons or 4x4 key pad.

Click Here for more information on Genesys 6LoWPAN Gateway/Router devices

Click Here to download the Genesys 6LoWPAN Gateway (Pro) Product Brochure

Genesys 6LoWPAN Meshing Node Genesys Modular Stack

6LoWPAN Meshing Node

GEN-AM-201

The 6LoWPAN Meshing Node is a versatile device that can operate as a stand-alone M2M access point, or as a wireless network repeater to boost the range of an existing installation.

The Meshing Node comes equipped with a spacious enclosure and Genesys Modular Stack technology, allowing it to seamlessly integrate with all modules bearing the Genesys Modular Stack logo, including GPS, climate sensing, 3G/4G connectivity and Wi-Fi.

Click Here for more information on Genesys 6LoWPAN Meshing Node devices

Click Here to download the Meshing Node Product Brochure

Genesys 6LoWPAN Meshing Node Pro Version Genesys Modular Stack

6LoWPAN Meshing Node Pro

GEN-AM-201P

The 6LoWPAN Meshing Node Pro provides advanced I/O functionality combined with full IEEE 802.15.4 interoperability.

Tough and reliable, the 6LoWPAN Meshing Node Pro is suitable for outdoor use and is built to withstand the most punishing of demands, even during power loss due to its high-capacity SLA uninterruptable power supply. It is fully Genesys Modular Stack compatible and can also be extended with the GBU-XN-200 LCD accessory board, providing a 128x64 backlit LCD, user LEDs and various configurations of pushbuttons.

Click Here for more information on Genesys 6LoWPAN Meshing Node devices

Click Here to download the Meshing Node Pro Product Brochure

Genesys 6LoWPAN Spatial Sensor I/O Node Genesys Modular Stack

6LoWPAN Spatial Sensor I/O Node

GEN-AM-202

The 6LoWPAN Spatial Sensor I/O Node is a fully featured portable M2M node with an integrated Lithium-Ion Polymer (LiPo) battery, giving you the flexibility to both control your device and monitor its surroundings including its physical location, with no strings attached.

Enclosed in the Spatial Sensor I/O Node package is contactless charging interface for the integrated battery and includes GNSS location fixing, 9-axis accelerometer, temperature and humidity sensors pre-fitted on a Genesys Modular Stack module.

Click Here to download the Spatial Sensor I/0 Node Product Brochure

Genesys 6LoWPAN Spatial Sensor I/O Node Pro Genesys Modular Stack

6LoWPAN Spatial Sensor I/O Node Pro

GEN-AM-202P

The 6LoWPAN Spatial Sensor I/O Node Pro extends on the flexibility of the Spatial Sensor I/O Node with a generous amount of digital and analogue I/O options available out of the box.

Coupled with an optional user interface board (GBU-XN-200) with LCD screen and context-sensitive buttons and LEDs, along with a alpha-numeric keypad, you can enjoy on-device monitoring of spatial and environmental data, in addition to display your M2M application status.

Click Here to download the Spatial Sensor I/0 Node Product Brochure

Genesys Keyfob Node Genesys Modular Stack

Keyfob Node

GBI-BA-200

The Genesys Keyfob Base Board is a general purpose M2M/IoT actuator that offers a variety of I/O interfaces. The Base Board comes with real-time clock, buzzer, vibration motor and a set of three pushbuttons and RGB LEDs which can be readily configured for any application.

Intended as a low-cost solution, the Keyfob does not come with battery charging capabilities.

Click Here to download the Keyfob Base Board Product Brochure

Genesys Keyfob Node Pro Genesys Modular Stack

Keyfob Node Pro

GBI-BA-200P

In addition to the capabilities offered by the standard Genesys Keyfob Base Board, the Pro version features a full suite of sensors including temperature sensing, humidity sensing, GNSS location acquisition, RTC and a three-axis accelerometer. The device supports the capability of contactless charging of the inbuilt rechargeable LiPo battery.

Click Here to download the Keyfob Base Board Pro Product Brochure

Genesys Keyfob Node Ultra Genesys Modular Stack

Keyfob Node Ultra

GBI-BA-200U

The Ultra-Keyfob extends on the capabilities of the Pro version with a resistive touch-based 1.8 inch TFT LCD screen and multiple LED/pushbutton shortcut keys as user the primary user interface. With the flexibility and greater interface options offered by touch technology, sophisticated GUI design possibilities are offered to the designer.

Click Here to download the Keyfob Base Board Ultra Product Brochure

USB Microphone top view showing mute buttons and microphone location and headphone jack

USB Microphone

1SEU-AU-200

The Genesys Products USB Microphone is founded on a miniaturised USB 2.0 stereo sound card chipset, and provides plug-and-play microphone connectivity solutions for computing devices that do not include a built-in microphone.

Click Here for more information on the USB Microphone

Click Here To Download the USB Microphone (1SEU-AU-200) Product Brochure

Genesys NetComm Wireless M2M Network Processors NetComm Wireless

M2M IoT Network Processor Pro Series

GEP-PM-200P, GEP-PM-201P, GEP-PM-202P

The M2M IoT Network Processor Pro series are industrial-grade NetComm Wireless NTC-6908, NTC-6200 or NTC-40WV Linux routers fitted with custom software developed by Genesys to implement a configurable common data abstraction model that allows any type of IO device with any physical interface or communications channel to be made interoperable with any other device.

These powerful devices support advanced features made possible by their Linux roots including web serving, machine logic engines, cloud communications and custom applications.

Click Here to download the Network Processor Product Brochure



System Case Studies
Genesys M2M & IoT System

M2M/IoT Base Installation

GSS-GM-200

Genesys' complete M2M system provides a series of hardware and software modules to fit any monitoring and control requirement. Tailored to your application by Genesys engineers and designed to be completely scalable and modular, Genesys M2M IoT will service all of your M2M needs today and in the future.

Click Here for more information on Genesys M2M IoT technology

Click Here to download the Genesys M2M Technology Overview Brochure

Genesys Building Management System

Genesys Building Management System

GSS-GM-201

Turn your existing building into a Smart Building! Genesys’ Building Management System is a customised M2M solution for enabling the systems in multiple building to be monitored and controlled remotely. Systems such as elevators, lighting, security, HVAC and energy monitoring can be controlled using a web interface, tablet or mobile phone.

Because Genesys’ M2M technology is scalable, our system can be upgraded as your needs grow.

Click Here to download the Genesys Building Management System Product Brochure

Genesys M2M Office Monitoring & Automation System

Office Monitoring & Automation System

GSS-GM-202

Genesys’ M2M Office Automation System provides a scalable, interactive solution to propel your workplace into an intelligent, connected future. Your central M2M IoT Network Server can be made to interface with any existing lighting, HVAC, security and access control systems. Genesys M2M IoT technology enables these disparate systems to work together seamlessly to provide a greener, more secure and more productive working environment.

Click Here to download the Office Monitoring & Automation System Product Brochure

Genesys M2M Elevator Monitoring System

Elevator Monitoring System

GSS-GM-203

The Elevator Remote Monitoring system allows elevator systems to be remotely monitored over the Internet, using a 3G/4G wireless connection, or an existing Internet site connection if available.

Status signals available in the Plant Room can be remotely monitored, including Elevator Car movement, floor location door condition and alarms. Drive system status, performance and alarms can also be monitored.

Click Here for more information on the Elevator Monitoring System

Click Here to download the Elevator Monitoring System Product Brochure



Tools
Desktop PC running Genesys Viztool

Viztool - Visualisation Tool for Web

GTU-SM-200

The M2M IoT Viztool is an advanced web-based M2M ecosystem setup, monitoring and control tool; hosted either locally on your M2M IoT Network Server or Genesys’ Cloud Server. Viztool can be used to configure and commission your Genesys M2M network from any desktop or mobile browser; including setting up machine-to-machine links. All real-time and historical logging data about ecosystem events, component activity and network communications are readily accessible in Viztool. Genesys can create a customised version of Viztool on request, tailoring its functionality to your application.

Click Here to download the Web Viztool Product Brochure

Genesys Viztool (Android)

VizTool - Visualisation Tool for Android™

GTU-AM-200

Control and monitor your M2M/IoT system from the palm of your hand! The VizTool app for Android™ smartphones and tablets gives you the power to adjust every setting in your M2M installation. Viztool takes advantage of the powerful multicore processors in today’s phones and tablets to render slick, informative visualisations of your M2M network - from floor plans to interactive location maps to faithful 3D recreations of your industrial equipment.

Click Here to download the Android Viztool Product Brochure

Diagram showing data transfer from connected devices through the cloud to a laptop or smart phone.

ITS - IoT Supervisor System

GSS-SM-200

The patent pending Genesys IoT Supervisor System provides simple yet powerful monitoring of deployed devices. By receiving heartbeat messages from thousands of deployed devices, or ‘things’, the IoT Supervisor monitors their activity and alerts administrators to faults. It works by collating the heartbeat messages and intelligently rationalising a simple list of device health, reporting by exception and/or by health summary. Using innovative technology that enables rapid deployment and re-configuration of devices, the IoT Supervisor is a must-have tool for modern IoT deployments.

Click Here to download the IoT Supervisor System Product Brochure